014-1062-030 - Follower plate for pumps with shank 30 mm subgroup-accessoires-en-losse-onderdelen-vet-oplossingen Those are suitable for central

Those are suitable for central supply of plants where a major pressure at long and short distance is required

The cabinet is pre-arranged for max 4 hose reels and have a worktop of 1600X700 mm

The operating pressure of the pumps can vary between a minimum of 3 bar and a maximum of 8 bar

the stocking of lubricant drums in the industrial environment and in repair shops must have a tank to collect the accidental overflowing

workshop for industrial vehicles in which is

014-1062-030 - Follower plate for pumps with shank 30 mm subgroup-accessoires-en-losse-onderdelen-vet-oplossingen Those are suitable for centralIt is advisable to use always the follower plate. it is very important of ambient temperature is low and when high viscosity grease is used. Because of the depression created by the pump. the plate is attracted towards the bottom of the drum by atmospheric pressure. It pushing the grease into the pump and avoids air cavities. Also it removes the grease remaining on the walls down to the bottom of the drums.